SKU: | |
---|---|
Beschikbaarheid Status: | |
Hoeveelheid: | |
CGK/C-12(LH)
SPRSUN
Eigenschappen>> |
SPRSUN luchtwarmtepompen zijn ontworpen voor huishoudelijke/commerciële verwarming van ruimtes (huizen) in de air conditioning markt, tot omgevingstemperaturen van -10°C.
Efficiënt en energiebesparend
Luchtwarmtepompen absorberen warmte-energie uit de buitenlucht en gebruiken alleen elektriciteit om de compressor aan te drijven die de warmte uit de lucht haalt. Daarom gebruikt een luchtwarmtepomp maar een kwart van de energie die traditionele elektrische verwarmingen gebruiken, waardoor gebruikers veel kunnen besparen op hun elektriciteitskosten.
Green and Environmental Protectio
Door het gebruik van warmte uit de lucht en elektriciteit worden er geen schadelijke gassen uitgestoten tijdens het gebruik van warmtepompen. R134A koudemiddel garandeert CFK-vrije uitstoot.
Bruikbaar in alle weersomstandigheden
Bruikbaar bij alle weersomstandigheden: Stabiele werking zonder invloeden van wind, regen of sneeuw.
Duurzaam
De Enhanced Vapor Injection (EVI) technologie van de Copeland compressor, het Danfoss elektronische expansieventiel, de Eaton AC relais en thermische relais en andere merkonderdelen van de warmtepomp garanderen een hoge kwaliteit en een lange levensduur. Al onze schroeven en klemmen (zowel extern als intern) zijn gemaakt van roestvrij staal. De buitenmantels die we gebruiken zijn gemaakt van gegalvaniseerd staal, waardoor ze beter bestand zijn tegen roest en duurzaam zijn.
Meerdere beveiligingen
Als de waterflow bijvoorbeeld niet voldoende is in het systeem, zal het systeem een hoge druk beschermingswaarschuwing laten zien en zal de pomp automatisch stoppen om de compressor tegen schade te beschermen. Er is ook een spanningsbeveiliging: als de voeding niet stabiel is, zal de warmtepomp een hoge stroomsterkte waarschuwing geven en de pomp stoppen om schade aan te compressor te voorkomen.
Thermostaat functie
Functie voor extern aan/uit signaal.
Gegarandeerde veilighei
Complete scheiding van water en elektriciteit voorkomt elektrische schokken, explosies en vergiftiging.
Specificities>> |
Nominale werkomstandigheden: dry-bulb temperatuur: 20°C; wet-bulb temperatuur: 15°C; koud watertemperatuur: 15°C; warm watertemperatuur: 75°C.
Model | CGK/C-12(LH) | CGK/C-12(LH) | |
Voeding | V | 220V~240V/50Hz/1ph | 380V~415V/50Hz/3ph |
Koudemiddel | R134A | ||
Verwarmingscapaciteit | KW | 7.5 | 8.5 |
Ingangsvermogen | KW | 2.61 | 2.96 |
COP | 2.87 | 2.87 | |
Nominale stroomsterkte | A | 13.2 | 5.6 |
Maximale stroomsterkte | A | 17.8 | 7.6 |
Ventilatormotor vermogen | W | 90 | 90 |
Aantal ventilatormoteren | Piece | 1 | 1 |
Water ratio | L/h | 107 | 122 |
Water debiet | L/h | 2150 | 2436 |
Waterdruk verval | Kpa | ≤40 | ≤40 |
Netto gewicht | kg | 112 | 112 |
Totaal gewicht | kg | 118 | 118 |
Geluidsdruk | db | 50 | 50 |
Waterdichtheidsclassificatie | IPX4 | ||
Electrische isolatie graad | I | ||
Aansluitmaat (binnendraad) | mm | 25 | 25 |
Afmeting | mm | 830*490*1160 | 830*490*1160 |
Afmeting verpakking | mm | 910*500*1320 | 910*500*1320 |
Compressor Model / Aantal | ZW30KSE*1 | ZW34KSE*1 |
SPRSUN EVI High Temperature Heat Pumps use high quality components, such as Copeland Enhanced vapour injection (EVI) technologh compressor, Danfoss Electronic expansion valve and Eaton AC contactor and thermal relay.
It is easy to install SPRSUN air source high temp heat pump as below:
SPRSUN High Temperature Air source Heat Pump COP at different temp conditions:
Air Temp ℃ | Water Temp ℃ | ||||
15-40 | 15-50 | 15-60 | 15-70 | 15-75 | |
-7 | 2.44 | 2.32 | 2.21 | 2.12 | 2.06 |
2 | 3.05 | 2.90 | 2.76 | 2.65 | 2.57 |
7 | 3.09 | 2.93 | 2.79 | 2.68 | 2.60 |
10 | 3.15 | 2.99 | 2.84 | 2.73 | 2.65 |
15 | 3.25 | 3.08 | 2.93 | 2.82 | 2.74 |
20 | 3.38 | 3.21 | 3.05 | 2.94 | 2.85 |
25 | 3.55 | 3.37 | 3.21 | 3.08 | 2.99 |
30 | 3.73 | 3.53 | 3.37 | 3.24 | 3.14 |
We care every detail on what you need!
Super Low Noise: Fitted cut clothes for compressor and strong pads to avoid vibration
Anti-corrosion: Aluminum edging
Exellent Welding Guarantee No Leakage: Four-way valve welding protection
Energy Saving: 30mm thickness for insulation to prevent energy lost
User-friendly Design: Ram design using machine wire
Reliability of the Connection: Adopt automatic stamping machine from Taiwan
Energy Saving Up to 75%: Compared with solar water heaters, gas water heaters and electric water weaters, the energy cost saved by SPRSUN air source heat pump water heaters is shocking.
Item | SPRSUN Heat Pump | Solar Water Heater | Gas Water Heater | Electric Water Heater | |
Heat source | electicity | solar+electricity | natural gas | liquefield gas | electricity |
Heat Value | 860kcal/kw/h | 860kcal/kw/h | 9000kcal/m³ | 1080kcal/kg | 860kcal/kw/h |
Efficiency | 450% | 1/3 time use of electric heater | 90% | 85% | 90% |
Energy consumption per day | 2.07kw/h | 3.45kw/h | 0.99m³ | 0.87kg | 10.34kw/h |
Cost | $0.11/kw.h | $0.11/kw.h | $0.42/m³ | $1.1/kg | $0.11/kw.h |
Cost per day | $0.23 | $0.38 | $0.42 | $0.96 | $1.14 |
Annual cost | $84 | $139 | $153 | $350 | $416 |
Related models are as below:
Eigenschappen>> |
SPRSUN luchtwarmtepompen zijn ontworpen voor huishoudelijke/commerciële verwarming van ruimtes (huizen) in de air conditioning markt, tot omgevingstemperaturen van -10°C.
Efficiënt en energiebesparend
Luchtwarmtepompen absorberen warmte-energie uit de buitenlucht en gebruiken alleen elektriciteit om de compressor aan te drijven die de warmte uit de lucht haalt. Daarom gebruikt een luchtwarmtepomp maar een kwart van de energie die traditionele elektrische verwarmingen gebruiken, waardoor gebruikers veel kunnen besparen op hun elektriciteitskosten.
Green and Environmental Protectio
Door het gebruik van warmte uit de lucht en elektriciteit worden er geen schadelijke gassen uitgestoten tijdens het gebruik van warmtepompen. R134A koudemiddel garandeert CFK-vrije uitstoot.
Bruikbaar in alle weersomstandigheden
Bruikbaar bij alle weersomstandigheden: Stabiele werking zonder invloeden van wind, regen of sneeuw.
Duurzaam
De Enhanced Vapor Injection (EVI) technologie van de Copeland compressor, het Danfoss elektronische expansieventiel, de Eaton AC relais en thermische relais en andere merkonderdelen van de warmtepomp garanderen een hoge kwaliteit en een lange levensduur. Al onze schroeven en klemmen (zowel extern als intern) zijn gemaakt van roestvrij staal. De buitenmantels die we gebruiken zijn gemaakt van gegalvaniseerd staal, waardoor ze beter bestand zijn tegen roest en duurzaam zijn.
Meerdere beveiligingen
Als de waterflow bijvoorbeeld niet voldoende is in het systeem, zal het systeem een hoge druk beschermingswaarschuwing laten zien en zal de pomp automatisch stoppen om de compressor tegen schade te beschermen. Er is ook een spanningsbeveiliging: als de voeding niet stabiel is, zal de warmtepomp een hoge stroomsterkte waarschuwing geven en de pomp stoppen om schade aan te compressor te voorkomen.
Thermostaat functie
Functie voor extern aan/uit signaal.
Gegarandeerde veilighei
Complete scheiding van water en elektriciteit voorkomt elektrische schokken, explosies en vergiftiging.
Specificities>> |
Nominale werkomstandigheden: dry-bulb temperatuur: 20°C; wet-bulb temperatuur: 15°C; koud watertemperatuur: 15°C; warm watertemperatuur: 75°C.
Model | CGK/C-12(LH) | CGK/C-12(LH) | |
Voeding | V | 220V~240V/50Hz/1ph | 380V~415V/50Hz/3ph |
Koudemiddel | R134A | ||
Verwarmingscapaciteit | KW | 7.5 | 8.5 |
Ingangsvermogen | KW | 2.61 | 2.96 |
COP | 2.87 | 2.87 | |
Nominale stroomsterkte | A | 13.2 | 5.6 |
Maximale stroomsterkte | A | 17.8 | 7.6 |
Ventilatormotor vermogen | W | 90 | 90 |
Aantal ventilatormoteren | Piece | 1 | 1 |
Water ratio | L/h | 107 | 122 |
Water debiet | L/h | 2150 | 2436 |
Waterdruk verval | Kpa | ≤40 | ≤40 |
Netto gewicht | kg | 112 | 112 |
Totaal gewicht | kg | 118 | 118 |
Geluidsdruk | db | 50 | 50 |
Waterdichtheidsclassificatie | IPX4 | ||
Electrische isolatie graad | I | ||
Aansluitmaat (binnendraad) | mm | 25 | 25 |
Afmeting | mm | 830*490*1160 | 830*490*1160 |
Afmeting verpakking | mm | 910*500*1320 | 910*500*1320 |
Compressor Model / Aantal | ZW30KSE*1 | ZW34KSE*1 |
SPRSUN EVI High Temperature Heat Pumps use high quality components, such as Copeland Enhanced vapour injection (EVI) technologh compressor, Danfoss Electronic expansion valve and Eaton AC contactor and thermal relay.
It is easy to install SPRSUN air source high temp heat pump as below:
SPRSUN High Temperature Air source Heat Pump COP at different temp conditions:
Air Temp ℃ | Water Temp ℃ | ||||
15-40 | 15-50 | 15-60 | 15-70 | 15-75 | |
-7 | 2.44 | 2.32 | 2.21 | 2.12 | 2.06 |
2 | 3.05 | 2.90 | 2.76 | 2.65 | 2.57 |
7 | 3.09 | 2.93 | 2.79 | 2.68 | 2.60 |
10 | 3.15 | 2.99 | 2.84 | 2.73 | 2.65 |
15 | 3.25 | 3.08 | 2.93 | 2.82 | 2.74 |
20 | 3.38 | 3.21 | 3.05 | 2.94 | 2.85 |
25 | 3.55 | 3.37 | 3.21 | 3.08 | 2.99 |
30 | 3.73 | 3.53 | 3.37 | 3.24 | 3.14 |
We care every detail on what you need!
Super Low Noise: Fitted cut clothes for compressor and strong pads to avoid vibration
Anti-corrosion: Aluminum edging
Exellent Welding Guarantee No Leakage: Four-way valve welding protection
Energy Saving: 30mm thickness for insulation to prevent energy lost
User-friendly Design: Ram design using machine wire
Reliability of the Connection: Adopt automatic stamping machine from Taiwan
Energy Saving Up to 75%: Compared with solar water heaters, gas water heaters and electric water weaters, the energy cost saved by SPRSUN air source heat pump water heaters is shocking.
Item | SPRSUN Heat Pump | Solar Water Heater | Gas Water Heater | Electric Water Heater | |
Heat source | electicity | solar+electricity | natural gas | liquefield gas | electricity |
Heat Value | 860kcal/kw/h | 860kcal/kw/h | 9000kcal/m³ | 1080kcal/kg | 860kcal/kw/h |
Efficiency | 450% | 1/3 time use of electric heater | 90% | 85% | 90% |
Energy consumption per day | 2.07kw/h | 3.45kw/h | 0.99m³ | 0.87kg | 10.34kw/h |
Cost | $0.11/kw.h | $0.11/kw.h | $0.42/m³ | $1.1/kg | $0.11/kw.h |
Cost per day | $0.23 | $0.38 | $0.42 | $0.96 | $1.14 |
Annual cost | $84 | $139 | $153 | $350 | $416 |
Related models are as below:
Our experienced engineering team provides good support for any questions concerning the products and installation before, during and after products are sold.
Before Selling
Set up customers file and arrange professional sales engineers to introduce company products and services to customers in details.
If customers are interested in our products, we will send professional technicians to survey the installation environment.
Provide solutions according to different customers' requirements.
During Selling
Machine installed and tested by QA engineers.
Ensure all the products we provide are qualified and new. The working life of the main engine is 15 years.
Construct and install the heat pump according to national relevant policies strictly and ensure high quality delivery on time.
Test and debug the equipments strictly to ensure the safety and stability.
During the delivery, provide comprehensive and professional technical training on instructions and maintenance to customers.
After Selling
We promise to offer free consulting call in 7×24 hours mode to solve the problems found in practice. The number is 86-20-82181867.
Sprsun offers 18-month long warranty. Within 18 months since the delivery date, if the product has any failure under normal usage, Sprsun will provide free assembly parts.
After the expiration of the warranty period, we will continue to provide lifelong maintenance services, with just a small amount of charges.
Our experienced engineering team provides good support for any questions concerning the products and installation before, during and after products are sold.
Before Selling
Set up customers file and arrange professional sales engineers to introduce company products and services to customers in details.
If customers are interested in our products, we will send professional technicians to survey the installation environment.
Provide solutions according to different customers' requirements.
During Selling
Machine installed and tested by QA engineers.
Ensure all the products we provide are qualified and new. The working life of the main engine is 15 years.
Construct and install the heat pump according to national relevant policies strictly and ensure high quality delivery on time.
Test and debug the equipments strictly to ensure the safety and stability.
During the delivery, provide comprehensive and professional technical training on instructions and maintenance to customers.
After Selling
We promise to offer free consulting call in 7×24 hours mode to solve the problems found in practice. The number is 86-20-82181867.
Sprsun offers 18-month long warranty. Within 18 months since the delivery date, if the product has any failure under normal usage, Sprsun will provide free assembly parts.
After the expiration of the warranty period, we will continue to provide lifelong maintenance services, with just a small amount of charges.